miniature ceramic ? hcmos surface mount 5vdc or 3.3vdc voltage-controlled crystal oscillators aslv and asv v s eries features: ? low profile (1.7 mm) ceramic vcxo. 5 vdc or 3.3 vdc. enable / disable functions. suitable for reflow methods . 7.0 mm x 5.0 mm seam welded. hcmos/ttl output. dimensions: inches (mm) a bypass capacitor 0.01 f is required from vdd to gnd. please call us for higher frequencies. test circuit, waveforms, see appendix b. environmental and mechanical specifications see appendix c, group 2. marking, see appendix g. tape and reel, see appendix h.(1,000 pcs.reel). application notes, see appendix a. recommended handling, see appendix f. as x v- frequency - t emperature stability - duty cycle - pulling - packaging xx.xxxxx mhz lorv -t tape and reel -s for 45 / 55% @ 1 / 2 vdd ordering options pin function no. 1 voltage control vc 2 tristate e/d 3 gnd / case 4 output 5 n / c ** 6v dd s s t t a a n n d d a a r r d d s s p p e e c c i i f f i i c c a a t t i i o o n n s s parameters aslv asv v ?1? or open: oscillation > _ 2.2v ?0?: (hi z) < 0.8v output disabled in high impedance applications: phase locked loops (plls). clock recover, digital transmission device. synthesizers. digital set-top box. frequency range (f o ) 1.00 mhz - 155.52 mhz (see note) operating temperature (t opr ) 0c to +70c (see option) storage temperature (t sto ) -40c to +85c frequency stability ( ? f / f o ) 50ppm max. (see options) supply voltage (v dd ) 5vdc 5% 3.3vdc 5% input current ( i dd ) 10ma max. for f < 20mhz 10ma max. for f < 20mhz 20ma max. for f < 40mhz 15ma max. for f < 40mhz 30ma max. for f < 60mhz 25 ma max. for f < 60mhz duty cycle or symmetry 40 / 60% max. (see options) rise and fall times (t r / t f ) 8ns max. output load 15pf or 2tt l output voltage (v oh ) 0.9 * v dd min. (v ol ) 0.1*vdd max. transfer function positive voltage control (vc) 2.5vdc 2.0v 1.65vdc 1.5v frequency deviation 100ppm min. (see options) 80ppm min. (see options) linearity 10% max. start-up time (t osc ) 10ms max. tristate function ( v ih ) ?1? or o pen : o scillation > 2.2v ( v il ) ?0? (h i z) < 0.8v period jitter one sigma 10ps max. period jitter abslute 100ps max. n102 for 100ppm min. @ vc = 0v to 3.0vdc* n122 for 120ppm min. @ vc = 0v to 3.0vdc* operating frequency stability ( ppm) te mperature range 5ppm 10ppm 15ppm 20ppm 30ppm 50ppm code 05 10 15 20 30 50 0c~50c i 0 0 0 0 0 - 0c~60c b 0 0 0 0 0 -10c~60c d 0 0 0 0 0 0c~70c c 0 0 0 0 -10c~70c f 0 0 0 0 -20c~70c e 0 0 0 -40c~85c l 0 0 ** pin 5 e/d (aslv1 or asvv1) 0= available 7.0 x 5.0 x 1.7 mm note: higher frequencies available. please call. abracon is iso 9001 / qs 9000 certified note: left blank if standard all specifications and markings subject to change without notice 29 journey aliso viejo, ca 92656 usa (949) 448-7070 f ax : (949) 448-8484 e- mail : abinfo @ abracon.com i nternet a ddress : www.abracon.com abracon is iso 9001 / qs 9000 certified abracon ? corporation 60
|